Pre-Exam Courses

Course Name

Length16 hours
Course Schedule2 evenings, 6:00pm – 10:00pm
DescriptionThis is an entry level program for those A Gas Technician 3 (G3) license will enable you to work under supervision on any natural gas or propane fired equipment.
Examples: Furnaces, Fireplaces, Water Heaters, Pool Heaters, Stoves, Clothes Dryer, etc.

As part of the program we also offer job search assistance.
Course OutlineThis program covers the G3 modules 1 to This is a review for all individuals that would like to refresh their knowledge of modules 1 to 9, and the applicable codes, acts and regulations.
ExamThe theory examination will be given by HiMark at our location upon completion of the course. The practical examination must be given by a T.S.S.A. Fuels Safety Inspector and arranged through T.S.S.A. by the student.
Pre-requisiteNone.
However, individuals without previous experience are recommended to take the full course.
Codebooks Required• B149.1 – Natural Gas & Propane Installation Code
• B149.2 – Propane Storage & Handling Code
• Ontario Act, Regulations, and Code Adoption Documents for use with B149 Code Series
Application Processing Fee$316.40
Course Cost$1,153.73
This is an all-inclusive price including applicable taxes, course modules and tuition fees. This price does not include codebooks, exam fees or administration fees for funded students. Prices are subject to change.
RegisterToronto, Barrie, Cambridge, Oshawa, Ottawa

Length32 hours
Course Schedule2 Evenings, 6:00pm – 10:00pm
DescriptionA Gas Technician 2 (G2) license will enable you to install, inspect, alter, purge, activate, repair, service or remove a natural gas or propane appliance that has an input of 400,000 Btuh or less without supervision in residential and commercial applications.
Examples: Furnaces, Fireplaces, Water Heaters, Pool Heaters, Stoves, Clothes Dryer, etc.

As part of the program we also offer job search assistance.
Course OutlineThis is a review for individuals who would like to refresh their knowledge of modules 10 to 24, and the applicable codes, acts and regulations.
ExamThe theory examination will be given by HiMark at our location upon completion of the course. The practical examination must be given by a T.S.S.A. Fuels Safety Inspector and arranged through T.S.S.A. by the student.
Pre-requisiteT.S.S.A. letter of approval
Codebooks Required• B149.1 – Natural Gas & Propane Installation Code
• Ontario Act, Regulations, and Code Adoption Documents for use with B149 Code Series
• B149.2 – Propane Storage & Handling Code
Application Processing Fee$316.40
Course Cost$974.06
This is an all-inclusive price including applicable taxes, modules and tuition fees. This price does not include codebooks, exam fees or administration fees for funded students. Prices are subject to change.
RegisterToronto, Barrie, Cambridge, Oshawa, Ottawa

Length24 hours
Course Schedule2 Evenings, 6:00pm – 10:00pm
DescriptionA Gas Technician 1 (G1) license will enable you to install, inspect, alter, purge, activate, repair, service or remove a natural gas or propane appliance of any BTU input and the equipment and accessories essential to its operation. This includes residential, commercial and industrial applications.
Examples: Process Ovens, Furnaces, Fireplaces, Water Heaters, Pool Heaters, Stoves, Clothes Dryers, etc.

As part of the program we also offer job search assistance.
Course OutlineThis is a review for individuals who would like to refresh their knowledge of modules 26-31, and the applicable codes, acts and regulations.
ExamThe theory examination will be given by HiMark at our location upon completion of the course. The practical examination must be given by a T.S.S.A. Fuels Safety Inspector and arranged through T.S.S.A. by the student.
Pre-requisiteT.S.S.A. letter of approval.
Codebooks Required• B149.1 – Natural Gas & Propane Installation Code
• B149.2 – Propane Storage & Handling Code
• B149.3 – Code for the Field Approval of Fuel-Related Components on Appliances and Equipment
• Ontario Act, Regulations, and Code Adoption Documents for use with B149 Code Series
Application Processing Fee$316.40
Course Cost$974.06
This is an all-inclusive price including applicable taxes, modules and tuition fees. This price does not include codebooks, exam fees or administration fees for funded students. Prices are subject to change.
RegisterToronto, Barrie, Cambridge, Oshawa, Ottawa

Length60 hours
Course ScheduleMonday to Thursday, 5:30pm – 10:30pm
DescriptionThis is a preparation course for individuals who will be attempting the 313A Certification of Qualifications (C of Q) Examination administered by the Ontario College of Trades (OCOT).

Individuals who are currently enrolled in an apprenticeship program and want a review before writing the C of Q exam are highly recommended to register!

A 313A Residential Air Conditioning Systems Mechanic license will enable you to work on any cooling and heating-cooling combination systems including geo-exchange systems in residential, industrial, commercial and institutional settings. Specifically, you will be able to plan, lay out, install, start-up, maintain, service, repair, test, verify, commission and decommission refrigeration and AC systems, electronic components and their accessories.

In Ontario, the Refrigeration and Air Conditioning Trade is also a part of the Interprovincial Red Seal Program.

Furthermore, you do not need to have a 313D license before you can attempt the 313A C of Q exam.
Course OutlineThis course will provide you with an in-depth theoretical review of all modules to ensure that you have the knowledge that meet industry standards of practice for the trade.
ExamNone.
HiMark only offers the course and does not administer the C of Q exam. Students are recommended to book their exam through OCOT prior to registration.
Pre-requisiteNone.
However, you must be able to provide proof to OCOT of at least 5 years (or 9,000 hours) of field experience in a related trade to qualify to write the C of Q exam.
Application Processing Fee$100.00
Course Cost$1,547.54
This is an all-inclusive price including applicable taxes, tuition and book fees. Prices are subject to change.
RegisterToronto, Barrie, Cambridge, Oshawa, Ottawa

Length40 hours
Course ScheduleMonday to Thursday, 5:30pm – 10:30pm
DescriptionThis is a preparation course for individuals who will be attempting the 313D Certification of Qualifications (C of Q) Examination administered by the Ontario College of Trades (OCOT).

Individuals who are currently enrolled in an apprenticeship program and want a review before writing the C of Q exam are highly recommended to register!

A 313D Residential Air Conditioning Systems Mechanic license will enable you to work on residential air conditioning systems including geo-exchange systems. Specifically, you will be able to plan, lay out, install, start-up, maintain, service, repair, test, verify, commission and decommission residential AC systems, components and their accessories.
Course OutlineThis course will provide you with an in-depth theoretical review of all modules to ensure that you have the knowledge that meet industry standards of practice for the trade.
ExamNone.
HiMark only offers the course and does not administer the C of Q exam. Students are recommended to book their exam through OCOT prior to registration.
Pre-requisiteNone.
However, you must be able to provide proof to OCOT of at least 2.5 years (or 4,500 hours) of field experience in a related trade to qualify to write the C of Q exam.
Application Processing Fee$100.00
Course Cost$1,211.93
This is an all-inclusive price including applicable taxes, tuition and book fees. Prices are subject to change.
RegisterToronto, Barrie, Cambridge, Oshawa, Ottawa

Call Us To Register Today

We are available by phone Monday to Thursday –  7:30 am to 6:30 pm, and Friday from 7:30 am to 4:00 pm
Summer hours (June 21 to August 15) – Monday to Friday from 7:30 am to 4:00 pm
Our courses start multiple times throughout the year!
What are you waiting for?

Scroll to Top